Fully Automatic Paper Faced Gypsum Board Production Equipment

Fully Automatic Paper Faced Gypsum Board Production Equipment

1) The professional producer of gypsum board production line.
2) Powder-saving and Higher Production Capacity.
3) Smooth and Reliable Performance.
4) Fineness: 30—425Mesh (Adjustable).
5)Run for 1000 hours without Lubrication.

1.Paper Supply System

The special pneumatic shaft

Magnetic powder brake

Exact paper connection device

High definition automatic device

High definition automatic alignment device

2.Mixing System

Mainly consists of paper slurry,foaming agent,starch,water and additive etc

All slurry has the feedback signal of level indication and chain control each batching process according to the process requirement

3.Forming System

4.Conveying System

This part is composed of two sets solidification belt machine and one conveying roller machine.The three machines need to run synchronically.

5.Cutting System

Whole cut control algorithm is achieved by the separate PLC.

6.Transferring System

This part mainly function is gypsum board acceleration conveying,overturning,transit conveying and lifting.

7.Dryer System

Low heat consumption, heat preservation is good

8. Finished Products Converying System

This part mainly includes fast outlet,sizing and stacking which are all equipped double.

WE ALSO PROVIDE PROFESSIONAL ACCESSORIES>>>

Pre-sales Service:
The wide product range enables us to provide our customers with stand-alone machines or complete processing plants. Based on our customers’ request and budget, our experts make efficient, reliable solutions. Following customers’ order we produce strictly, what’s more, before placing the order every customer has the chance to visit zenith working machines or complete plant in the site.

To ease the trip for every visitor to China, in particular the first-time visitor, we provide FOR FREE all relevant visitor-friendly services including invitation letter Preparation, hotel reservation, airport pick-up, incity transportation, and sightseeing guide, etc.

After-sales Service:

Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customers’ plants. Necessary training about machine daily maintenance to local workers is provided also.

After-Sales department is made of well-trained employees and installation engineers, the installation engineers are special and professional members of Zenith, they are now strategically located home and abroad, working for our customers.

Guarantee:

3 years (except the easy worn parts such as bearings, electric buttons). I will always waiting for you online to solve your technology problems.

Installation & Debugging:

2 to 4 months when the buyer prepare the installation and commission conditions.

Technology Training:

Provide free training.

In order to guarantee the machine running, each year we will send engineer to check and development the technology with the buyer.

If the buyer can not run the machine well then we will send the production engineers to help the buyer to run the machine, and we can cooperate for long terms.

Fully Automatic Paper Faced Gypsum Board Production Equipment adopts world-class technology to customize and produce special racks. High strength, high wear resistance, sharp teeth, uniform and delicate powder slag processing, higher starch extraction rate. The replacement of racks is quick and easy, which greatly reduces the labor intensity of labor and greatly increases the production efficiency. The separation part adopts a non-frame-type three-section separation structure with low resistance and more energy-saving.
main functions:
For the extraction of potato starch, automatic fresh potato feed, crushing, separation, slagging, pulping. The machine is also suitable for sweet potato, sweet potato, hawthorn, kudzu, pFully Automatic Paper Faced Gypsum Board Production Equipmentn, and cassava.
Fully Automatic Paper Faced Gypsum Board Production Equipment advantages:
1: The smashing part is the first to use thorn bar type, discarding the manual sprint method in the past.
2: The lifespan of steel piercing teeth is twice the life of the previous piercing teeth, and can be replaced within ten minutes after wear.
3: The separation section uses a thick 40cm diameter separation tube, the separation is cleaner, and the powder extraction rate is more than 99%.

Jinan Joysun Machinery Co., Ltd. professional R & D and production of microwave aging equipment from whole grains, microwave equipment all over the country, are exported to Vietnam, India, Russia, Hong Kong, Taiwan and other places. The warm and hospitable Yuehong people adhering to the business philosophy of "scientific innovation, integrity, sustainability, quality first, excellent service", we sincerely provide you with practical, market-competitive prices and high quality and efficient service. Jinan Joysun Machinery Co., Ltd.. With a test platform, you are always welcome to test with materials, to discuss cooperation!

Shandong Leader Machinery Co.,Ltd.
Tel:+86 0531 85064681
Fax:+ 86 0531 85064682
Skype： taishan0072
What’sApp:+86 18905316466
Email: [email protected]

Address: No. 225, Huangqiao Village, Beiyuan, Tianqiao District, Jinan, Shandong, China

At Shandong Leader Machinery Co.,Ltd, we have one single goal in mind: to make you a satisfied customer. That single focus, driven from every aspect of the company's operation, is the key to our ongoing success. If you're a satisfied customer, you'll come back to us when you have additional Machine needs in the future, and you'll tell your friends about us. Then if we can make them satisfied customers, the cycle continues.

——————————————————————Wendy Yao Director