5-80TPH palm oil processing equipment, palm oil refining machine

5-80TPH palm oil processing equipment , palm oil refining machine

1. Main Business Field:

1.10-500T/H oil material first cleaning,drying and storage section turn-key project.
2.100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.
3.Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, LD separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
4.30-1000T/D oil continuous grade two or one physical (chemical) refining production line.
5.20-600T/D sunflower oil, rice bran oil, corn germ oil making and dewaxing turn-key project
6.10-200T/D Fatty acid esterification production cooking oil production line.
7.30-300T/D palm oil pressing line.
8.100-300T/D Coconut, peanut, sesame oil making project.

2. The processing technology parameter:

3.Reception station of palm oil processing equipment :

The FFB bunch be transported to plant by truck, after be weighted by weighting bridge(30T), the FFB will be loaded down to FFB Loading Ramp.

The iron door of unloading ramp is controlled by hydraulic device, Get the power from Hydraulic pump station. Start on the hydraulic device, iron door be lifted. FFB will fall down to the Palm Fruit screw conveyor, be transported to pre-treatment plant, to Vertical sterilizer.

4. Sterilizing process of palm oil processing equipment :

2.1 By Scraper Conveyor, FFB be transported to the top of sterilizing tank. Falling into sterilizing tank from feed inlet.

2.2 Sterilizing tank: Adopt vertical type sterilizer, WeLDd up by Q235B material (Chemical composition:C0.12~0.2%,Si0.12~0.3%,Mm0.3~0.7%,P
2.3 After FFB be transported into sterilizing tank (202), close the door of sterilizing tank, and open the vent valve behind the tank, saturating steam, which pressure is 3bar and temperature is around 130℃. After all cool air been discharged out, close vent valve, proceed to sterilizing section. Sterilizing time is 90~120minutes.

2.4 The sterilizing time also should be depend on the kind and quality of FFB, if the pressure is too high or the time is too long, palm fruit will be rot, also Resulting in the loss of oil, high temperature can change palm color.

2.5 Finish sterilizing process, close the steam valve, open the valve lead to Blow-off/down Silencer. Open the sterilizing tank door(FFB outlet) after discharges out all steam and water.

2.6 Open the sterilizing tank door, sterilized FFB will fall on the FFB Scraper conveyor. Be transported to next station.

5. Threshing station of palm oil processing equipment :

The sterilized FFB will be transport to thresher platform by scraper conveyor.

After sterilizing the fresh palm fruit bunch will be soft, and the bunch and fruit will be separate easily.

Sterilized FFB be twisted and knocked in thresher. Palm fruit will be separated from empty bunch totally, fall on Fruit Scraper conveyor though fence, the empty bunch will be transported to Bunch Temporary tank by Bunch Scraper conveyor.

6. Press station of palm oil processing equipment :

Palm fruit press

4.1.1 The palm fruit is transported to Crush tank by fruit elevator.

4.1.2 The fruit in crush tank will be heated to 90~95℃(by indirect steam), crush time is 10~20 minutes.

4.1.3 The pounded fruit flow into Palm fruit oil presser to press. Oil press cone can control cylinder, working pressure is 50~70bar, revolving speed of presser main shaft is 12.5 r/min. Meanwhile the mixture of crude palm oil and water outflow from barrel holes. Crude oil will be flow in Temporary Storage oil tank through crude oil groove. Then oil will be pumped to Screening filter by oil pump. After filtering take out the oil foam, deposit impurities. Palm oil flow into Passivating oil tank. The fiber cake and nucleus are exhausted from clearance of cone head drop on Breaking cake auger.

4.1.4 Palm fruit oil presser, the material of main shaft is 40Cr steel, (Chemical component: C0.37~0.44%,Si0.17~0.37%,Mn0.50~0.80%,Cr0.80~1.10%) have been thermal refining, the material of worm and cone head is 45# Cast-Steel, and the surface have quenching treatment.

7. Palm kernel press of palm oil processing equipment :

4.2.1 From kernel storage tank, kernel be transported to crusher, to be granulate. then conveyed to flaking mill by elevator, granular kernel will be pressed into unified shape. after cooking, palm kernel will be pressed by screw press machine.

4.2.2 Screw press machine operating principle:

1>When oil press is on work, material enters the extruding chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.

2>Under high temperature condition in the chamber, there is quite strong friction among press screw, chamber and the oil materials.

3>On the other hand, root diameter of the pressing screw carries larger from one end to the other.

4>Hence when rotating, the thread not only pushes particles moving forwards but also turns them outwards as well.

5>Meanwhile, particles adjacent the screw will rotate along with screw’s rotating, causing every particle inside the chamber to possess different speed.

6>Therefore, relative movement among particles creates neat which is necessary during manufacturing because of helping protein change property, damage colloid, increase plasticity, decrease oil’s elasticity, resulting in high oil.

8. Factory introduction of palm oil processing equipment :

LD &Oil Machinery Co.,Ltd is a large-sized joint-equity enterprise which specialize in producing edible oil mechanical equipment and it is also a group enterprise integrating scientific research, manufacturing, sales as one. Research Institute of Machine Design Company and LD, LD University of Technology (formerly the LD College) school-enterprise cooperation in the oil equipment to carry out long-term, protein extraction, phospholipid extraction, etc. R & D and application of new technologies.

9. Transport of palm oil processing equipment :

10. Certification of palm oil processing equipment :

11. Engineering department of palm oil processing equipment :

12. Lab for palm oil processing equipment :

Oil refining means separating impurity from oil based on the different characteristics of oil and impurity, in order to enhance the stability and security of oil. Oil refining including two technologies, physical refining and chemical refining.echnological process details of 5-80TPH palm oil processing equipment, palm oil refining machine:
AAA1

1. Acid reaction process
Oil temperature can be adjusted by screw plate heat exchanger. When the temperature is heated to about 80℃, mixing about 85% food grade phosphoric acid into acid reaction tank for reacting. In the tank, most non-hydrated phospholipid transfer into hydrated phospholipid.
AAA1

2. Neutralization process
In the neutral section, degummed oil with appropriate temperature and the appropriate concentration of alkali liquor, into the neutralization centrifugal mixer mixing, in order to achieve the effect of mixed, the mixture is then sent to neutralization tank for enough time, in this process, excessive alkali neutralization of free fatty acids and some phosphate form soapstock , after pumping oil soap mixture into heater oil heating to 85 ~ 90 ℃ in centrifuge separation oil - soap (or oil - glue). Oil soapstock of the separated (or foot) feet into the oil tank, and then to the salting out with soap pump tank isolated part of the oil.
AAA2

3. Washing process
Neutral oil from separator, still contains about 500 ppm soap, in order to reduce the residual content of soap, oil is joined by about 10% of hot water, washed in the washing mixer, hot water will absorb oil soap and other impurities, then in the water separator are separated.

AAA3

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.

LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]

Shandong Leader Machinery Co.,ltd. is a microwave equipment, microwave drying sterilization machine, microwave heating equipment, microwave drying machine, microwave sterilization equipment, microwave drying equipment, whole s microwave curing equipment, microwave drying sterilization condiment, Shandong microwave drying Machine, melon seeds microwave dryer and other products specializing in the production and processing company, has a complete and scientific quality management system. Shandong Leader Machinery Co.,ltd.integrity, strength and quality of products recognized by the industry.

Why do you choose the Shandong Leader Machinery Co.,ltd. 5-80TPH palm oil processing equipment, palm oil refining machine?
1.Healthy! Pure mechanical squeezing craft maximally keeps the nutrients of the oil plants.No chemical substances left
2. High working efficiency! Due to a high working efficiency of the screw oil press machinery,both time and power can be saved.
3. Long durability! All the parts are made of the most suitable material and treated with refined crafts, such as cemented quenching and tempering to increase the hardness, consequently the durability.
4. 5-80TPH palm oil processing equipment, palm oil refining machineCost-effective! Low investment! The wearing parts on the oil press machinery such as the squeeze loop, squeeze spiral and squeeze bar are designed to be dismountable. When they are out of service period, users only need to replace them and there is no need to displace the whole machine.

Shandong Leader Machinery Co.,Ltd.
Tel:+86 0531 85064681
Fax:+ 86 0531 85064682
Skype： taishan0072
What’sApp:+86 18905316466
Email: [email protected]

Address: No. 225, Huangqiao Village, Beiyuan, Tianqiao District, Jinan, Shandong, China

At Shandong Leader Machinery Co.,Ltd, we have one single goal in mind: to make you a satisfied customer. That single focus, driven from every aspect of the company's operation, is the key to our ongoing success. If you're a satisfied customer, you'll come back to us when you have additional Machine needs in the future, and you'll tell your friends about us. Then if we can make them satisfied customers, the cycle continues.

——————————————————————Wendy Yao Director